Watershed XC 11122
Watershed XC 11122 is a clear polymer — clear water-resistant abs-like resin.
What is Watershed XC 11122?
Watershed XC 11122 is a clear polymer — clear water-resistant abs-like resin. Typical values: 50 MPa yield, 1.18 g/cm³, rated to 75 °C. Available for Injection molding, 3D printing at FabDigit.
Strength versus weight in the polymer family
Yield strength against density for every polymer grade FabDigit runs. Watershed XC 11122 is highlighted; hover a dot for its name, or open the interactive family chart.
Manufacturability
The process limits FabDigit's quote engine applies to Watershed XC 11122. Design inside these and the part quotes instantly; outside them it routes to an engineer.
Injection molding
| Mold shrinkage | — |
|---|---|
| Wall thickness | — – — |
| Recommended draft | — |
| Pre-drying | — |
3D printing
| Technologies | SLA |
|---|---|
| Layer height | 50 – 300 µmdefault 100 µm |
| Minimum wall / feature | 1 / 0.5 mm |
| Build envelope | 300 × 300 × 380 mm |
| Supports | Yes |
| Anisotropy | Moderate |
What surface finishes work on Watershed XC 11122?
Surface treatments FabDigit runs on polymer parts — pick them in the quote configurator or call them out on the drawing. Each links to its datasheet in the surface-finish library (thickness, specs, call-out, material verdicts).
Coating
Injection Molding Coating
Metallization / Functional
Coloring
How much does Watershed XC 11122 cost?
Watershed XC 11122 is a standard-cost polymer ($$), cheaper than about 82% of the materials FabDigit quotes. Part price depends far more on geometry, tolerance and quantity than on the raw stock — upload a CAD file for a live quote.
Watershed XC 11122 — frequently asked
How much does Watershed XC 11122 cost?
Watershed XC 11122 is a standard-cost polymer ($$), cheaper than about 82% of the materials FabDigit quotes. Part price depends far more on geometry, tolerance and quantity than on the raw stock — upload a CAD file for a live quote.
Can FabDigit make parts in Watershed XC 11122?
Yes — Watershed XC 11122 is available for injection molding and 3D printing with instant online pricing. Upload a STEP file to get a price and a DFM check.
Property data is compiled from published supplier and standards handbooks and normalised for comparison; hardness values on non-Brinell scales are converted approximately for charting only. Manufacturability limits are FabDigit quote-engine defaults and may be relaxed by engineering review. Nothing on this page is a certification — request mill certs, CoC or material test reports with your order.