ABS Black (SL 7820)
ABS Black (SL 7820) is a multipurpose polymer — black abs-like sla resin.
What is Accura ABS Black (SL 7820)?
ABS Black (SL 7820) is a multipurpose polymer — black abs-like sla resin. Typical values: 38 MPa yield, 1.18 g/cm³, rated to 80 °C. Available for Injection molding, 3D printing at FabDigit.
Strength versus weight in the polymer family
Yield strength against density for every polymer grade FabDigit runs. Accura ABS Black (SL 7820) is highlighted; hover a dot for its name, or open the interactive family chart.
Manufacturability
The process limits FabDigit applies to Accura ABS Black (SL 7820). Every Accura ABS Black (SL 7820) part is priced by an engineer; design inside these and the quote comes back without a redesign loop.
Injection molding
| Mold shrinkage | — |
|---|---|
| Wall thickness | — – — |
| Recommended draft | — |
| Pre-drying | — |
3D printing
| Technologies | SLA |
|---|---|
| Layer height | 50 – 300 µmdefault 100 µm |
| Minimum wall / feature | 1 / 0.5 mm |
| Build envelope | 300 × 300 × 380 mm |
| Supports | Yes |
| Anisotropy | Moderate |
What surface finishes work on Accura ABS Black (SL 7820)?
Surface treatments FabDigit runs on polymer parts — pick them in the quote configurator or call them out on the drawing. Each links to its datasheet in the surface-finish library (thickness, specs, call-out, material verdicts).
Coating
Injection Molding Coating
Metallization / Functional
Coloring
How much does Accura ABS Black (SL 7820) cost?
Accura ABS Black (SL 7820) is a standard-cost polymer ($$), cheaper than about 71% of the materials FabDigit quotes. Part price depends far more on geometry, tolerance and quantity than on the raw stock — upload a CAD file for a live quote.
Accura ABS Black (SL 7820) — frequently asked
How much does Accura ABS Black (SL 7820) cost?
Accura ABS Black (SL 7820) is a standard-cost polymer ($$), cheaper than about 71% of the materials FabDigit quotes. Part price depends far more on geometry, tolerance and quantity than on the raw stock — upload a CAD file for a live quote.
Can FabDigit make parts in Accura ABS Black (SL 7820)?
Yes — Accura ABS Black (SL 7820) is available for injection molding and 3D printing; every part is priced by an engineer rather than instantly. Upload a STEP file to get a price and a DFM check.
Property data is compiled from published supplier and standards handbooks and normalised for comparison; hardness values on non-Brinell scales are converted approximately for charting only. Manufacturability limits are FabDigit quote-engine defaults and may be relaxed by engineering review. Nothing on this page is a certification — request mill certs, CoC or material test reports with your order.