Farsoon FS3300PA (PA12, SLS)
Farsoon · SLS powder
Farsoon's PA12 powder for Selective Laser Sintering.
Farsoon datasheet values, printed parts
Other PA12 grades and fills
Compare the PA12 products and conditions in the library; see the grade overview at PA12.
- HP PA 12 GB
- Farsoon FS3300PA-F
- Formlabs Nylon 12 GF
- Sinterit PA12 Smooth
- FR
- ESD
- Formlabs Nylon 12 Tough
- Evonik INFINAM PA 12 (VESTOSINT)
- Farsoon FS3401GB
- HP PA 12 S
- AL
- HP PA 12 FR
- Farsoon FS3300PA
- EOS PA 2210 FR
- Formlabs Nylon 12 White
- EOS Alumide
- HP PA 12
- EOS PA 2200
- EOS PA 2201
- EOS PA 2220 HighReuse
- EOS PA 2200 CarbonReduced
- ALM PA 640-GSL
- HP PA 12 W
- EOS PrimePart FR (PA 2241 FR)
- Formlabs Nylon 12
- EOS PA 3200 GF
- CF
Compare all 27 grades and fillsHide
| Grade · open for datasheet | Best for | Yield MPa | Tensile MPa | Elong. % | Hardness |
|---|---|---|---|---|---|
HP 3D High Reusability PA 12 GB · MJF powder | A 40% glass-bead-filled PA 12 for stiff, dimensionally stable parts with fine detail and repeatability. | — | 29 | 10 | — |
SLS powder | — | — | 36 | 5 | — |
Formlabs Nylon 12 GF Powder · SLS powder | A glass-filled PA12 powder for rigid, dimensionally stable parts under sustained loading and elevated temperatures. | — | 38 | 4 | — |
SLS powder | — | — | 38 | 4.6 | 76 Shore D |
Flame-retardant PA12 | Use for aircraft interiors, rail and electrical enclosures where V-0 / FAR 25.853 burn compliance is mandatory; slightly lower toughness. | 40 | 44 | 6 | 78 Shore D |
Electrically conductive / static-dissipative PA12 | Choose for electronics handling trays, fixtures and fuel-system parts needing controlled surface resistivity (10⁶–10⁹ Ω). | 41 | 45 | 7 | 78 Shore D |
Formlabs Nylon 12 Tough Powder · SLS powder | A ductile PA12 powder for accurate, impact-resistant parts with reduced warpage and economical powder reuse. | — | 42 | 25 | — |
SLS powder | — | 43 | 49 | 311 | 75 Shore D |
SLS powder | — | — | 44 | 9.3 | — |
HP 3D High Reusability PA 12 S (enabled by Arkema) · MJF powder | A high-reuse PA 12 grade for smooth surfaces, fine detail, and cost-efficient aesthetic production parts. | — | 45 | 12 | — |
Aluminium-filled PA12 | Metallic-look, stiff, easily tumbled/polished parts for tooling aids and design models; better heat conduction, low elongation. | — | 46 | 4 | 80 Shore D |
HP 3D High Reusability PA 12 FR (enabled by Evonik) · MJF powder | A halogen-free flame-retardant PA 12 with a smooth finish for safety-critical housings and production components. | — | 46 | 4.7 | — |
Farsoon FS3300PAThis page SLS powder | — | — | 46 | 36 | — |
SLS powder | — | — | 46 | 4 | — |
Formlabs Nylon 12 White Powder · SLS powder | A white, dyeable PA12 powder for high-contrast prototypes, medical models, and customer-facing end-use parts. | — | 47 | 8 | — |
SLS powder | — | — | 48 | 4 | 76 Shore D |
HP 3D High Reusability PA 12 (enabled by Evonik) · MJF powder | HP's flagship MJF nylon balances strength, ductility, detail, and powder efficiency for functional production parts. | — | 48 | 20 | — |
SLS powder | — | — | 48 | 18 | 75 Shore D |
SLS powder | — | — | 48 | 15 | 75 Shore D |
SLS powder | — | — | 48 | 10 | — |
SLS powder | — | — | 48 | 18 | — |
SLS powder | — | — | 49 | 3 | — |
HP 3D High Reusability PA 12 W · MJF powder | A white engineering PA 12 for strong functional parts that can remain white or take vibrant color finishes. | — | 49 | 17 | — |
SLS powder | — | — | 49 | 15 | — |
Formlabs Nylon 12 Powder · SLS powder | A versatile, biocompatible PA12 powder for dimensionally accurate functional prototypes and durable end-use parts. | — | 50 | 11 | — |
SLS powder | — | — | 51 | 9 | 80 Shore D |
Carbon-fibre reinforced PA12 | Highest stiffness-to-weight powder-bed nylon — for lightweight brackets, drone and motorsport parts; strongly anisotropic and brittle. | — | 72 | 4 | 83 Shore D |
What is Farsoon FS3300PA?
Farsoon FS3300PA is Farsoon's PA12 powder for Selective Laser Sintering on Farsoon 402P / HT403P. Farsoon FS3300PA has a tensile strength of 46 MPa (6.67 ksi), weaker than 51% of polymer grades. Elongation at break is 36% and the elastic modulus is 1.602 GPa (0.232 Msi). Farsoon FS3300PA has a density of 0.95 g/cm³ (0.0343 lb/in³), lighter than 75% of polymer grades.
Advantages
- Lightweight — 0.95 g/cm³ (0.0343 lb/in³), better than 75% of polymer grades
About this powder
- Manufacturer
- Farsoon
- Product
- FS3300PA
- Base polymer
- PA12
- Process
- Selective Laser Sintering (SLS)
- Printers
- Farsoon 402P / HT403P
- As-printed colour
- White; dyeing options depend on the base colour and grade
- Build envelope
- 375 × 375 × 430 mm. Usable part size depends on orientation, spacing and process allowances.
- Build atmosphere
- Inert atmosphere specified; confirm the gas and settings for the printer/material profile.
- Manufacturer data source
- Farsoon source reference
- FabDigit material reference
- Download reference PDF — FabDigit layout with Farsoon data and source attribution.
- Ordering
- Specify this powder in your quote notes for an availability review.
Choosing FS3300PA
A white PA12 SLS powder for general functional parts on the named Farsoon polymer platforms.
- Consider it for
- Functional housings · Moderately ductile prototypes · Dye-finished PA12 components
- Tradeoffs
- The linked one-page TDS provides typical values but does not establish broad machine compatibility or a final-part performance guarantee.
- Design and validation
- Use the named Farsoon system and published test methods as the data basis. Prototype thin walls and loaded features, especially where orientation or conditioning is not stated.
- Finishing
- White is the as-printed base and can support dyeing. Select blasting, dyeing or coating based on the desired texture and validate any liquid-tightness requirement separately.
- Before choosing
- Is a general PA12 enough, or are wear/stiffness needs pushing toward a filled grade? Does the chosen machine match the source data?
Selection notes based on Farsoon FS3300PA material data sheet. Published test results depend on the stated printer, orientation and conditioning. Compare material families · Choose a finishing route.
Farsoon FS3300PA properties
Typical values for Farsoon FS3300PA; review each property’s test condition. Only this product’s reported properties are shown; unreported properties are omitted. Bars are the position among polymer grades.
Physical2
Farsoon FS3300PA has a density of 0.95 g/cm³ (0.0343 lb/in³), lighter than 75% of polymer grades.
per Manufacturer TDS
per ISO 11357-1:2020
Manufacturability1
per Manufacturer TDS
Thermal2
per ISO 75-1:2020
per ISO 75-1:2020
Mechanical5
Farsoon FS3300PA has a tensile strength of 46 MPa (6.67 ksi), weaker than 51% of polymer grades. Elongation at break is 36% and the elastic modulus is 1.602 GPa (0.232 Msi).
per ISO 527-1:2019
per ISO 527-1:2019
per ISO 527-1:2018
per ISO 178:2019
per ISO 178:2019
Use published values for design screening. Confirm the grade, build direction, conditioning and available lot documentation when quoting.
Farsoon FS3300PA — frequently asked
What is Farsoon FS3300PA used for?
A white PA12 SLS powder for general functional parts on the named Farsoon polymer platforms. Consider it for functional housings, moderately ductile prototypes and dye-finished PA12 components. The linked one-page TDS provides typical values but does not establish broad machine compatibility or a final-part performance guarantee.
What should I validate before using Farsoon FS3300PA?
Use the named Farsoon system and published test methods as the data basis. Prototype thin walls and loaded features, especially where orientation or conditioning is not stated. Is a general PA12 enough, or are wear/stiffness needs pushing toward a filled grade? Does the chosen machine match the source data?
How can Farsoon FS3300PA be finished?
White is the as-printed base and can support dyeing. Select blasting, dyeing or coating based on the desired texture and validate any liquid-tightness requirement separately.
Sources
Product values come from the selected manufacturer source and are normalised for comparison. Confirm the quoted process, build direction, conditioning and available lot documentation for the finished part.