EOS PA 2200 CarbonReduced (PA12, SLS)
EOS · SLS powder
EOS states that CarbonReduced uses the established PA 2200 technical properties, but the current PA 2200 Balance page does not publish a distinct CarbonReduced test table. This identity remains listed for procurement reference; product-specific properties and the FabDigit reference PDF are withheld pending a separately qualified document.
Other PA12 grades and fills
Compare the PA12 products and conditions in the library; see the grade overview at PA12.
- HP PA 12 GB
- Farsoon FS3300PA-F
- Formlabs Nylon 12 GF
- Sinterit PA12 Smooth
- FR
- ESD
- Formlabs Nylon 12 Tough
- Evonik INFINAM PA 12 (VESTOSINT)
- Farsoon FS3401GB
- HP PA 12 S
- AL
- HP PA 12 FR
- Farsoon FS3300PA
- EOS PA 2210 FR
- Formlabs Nylon 12 White
- EOS Alumide
- HP PA 12
- EOS PA 2200
- EOS PA 2201
- EOS PA 2220 HighReuse
- EOS PA 2200 CarbonReduced
- ALM PA 640-GSL
- HP PA 12 W
- EOS PrimePart FR (PA 2241 FR)
- Formlabs Nylon 12
- EOS PA 3200 GF
- CF
Compare all 27 grades and fillsHide
| Grade · open for datasheet | Best for | Yield MPa | Tensile MPa | Elong. % | Hardness |
|---|---|---|---|---|---|
HP 3D High Reusability PA 12 GB · MJF powder | A 40% glass-bead-filled PA 12 for stiff, dimensionally stable parts with fine detail and repeatability. | — | 29 | 10 | — |
SLS powder | — | — | 36 | 5 | — |
Formlabs Nylon 12 GF Powder · SLS powder | A glass-filled PA12 powder for rigid, dimensionally stable parts under sustained loading and elevated temperatures. | — | 38 | 4 | — |
SLS powder | — | — | 38 | 4.6 | 76 Shore D |
Flame-retardant PA12 | Use for aircraft interiors, rail and electrical enclosures where V-0 / FAR 25.853 burn compliance is mandatory; slightly lower toughness. | 40 | 44 | 6 | 78 Shore D |
Electrically conductive / static-dissipative PA12 | Choose for electronics handling trays, fixtures and fuel-system parts needing controlled surface resistivity (10⁶–10⁹ Ω). | 41 | 45 | 7 | 78 Shore D |
Formlabs Nylon 12 Tough Powder · SLS powder | A ductile PA12 powder for accurate, impact-resistant parts with reduced warpage and economical powder reuse. | — | 42 | 25 | — |
SLS powder | — | 43 | 49 | 311 | 75 Shore D |
SLS powder | — | — | 44 | 9.3 | — |
HP 3D High Reusability PA 12 S (enabled by Arkema) · MJF powder | A high-reuse PA 12 grade for smooth surfaces, fine detail, and cost-efficient aesthetic production parts. | — | 45 | 12 | — |
Aluminium-filled PA12 | Metallic-look, stiff, easily tumbled/polished parts for tooling aids and design models; better heat conduction, low elongation. | — | 46 | 4 | 80 Shore D |
HP 3D High Reusability PA 12 FR (enabled by Evonik) · MJF powder | A halogen-free flame-retardant PA 12 with a smooth finish for safety-critical housings and production components. | — | 46 | 4.7 | — |
SLS powder | — | — | 46 | 36 | — |
SLS powder | — | — | 46 | 4 | — |
Formlabs Nylon 12 White Powder · SLS powder | A white, dyeable PA12 powder for high-contrast prototypes, medical models, and customer-facing end-use parts. | — | 47 | 8 | — |
SLS powder | — | — | 48 | 4 | 76 Shore D |
HP 3D High Reusability PA 12 (enabled by Evonik) · MJF powder | HP's flagship MJF nylon balances strength, ductility, detail, and powder efficiency for functional production parts. | — | 48 | 20 | — |
SLS powder | — | — | 48 | 18 | 75 Shore D |
SLS powder | — | — | 48 | 15 | 75 Shore D |
SLS powder | — | — | 48 | 10 | — |
EOS PA 2200 CarbonReducedThis page SLS powder | — | — | 48 | 18 | — |
SLS powder | — | — | 49 | 3 | — |
HP 3D High Reusability PA 12 W · MJF powder | A white engineering PA 12 for strong functional parts that can remain white or take vibrant color finishes. | — | 49 | 17 | — |
SLS powder | — | — | 49 | 15 | — |
Formlabs Nylon 12 Powder · SLS powder | A versatile, biocompatible PA12 powder for dimensionally accurate functional prototypes and durable end-use parts. | — | 50 | 11 | — |
SLS powder | — | — | 51 | 9 | 80 Shore D |
Carbon-fibre reinforced PA12 | Highest stiffness-to-weight powder-bed nylon — for lightweight brackets, drone and motorsport parts; strongly anisotropic and brittle. | — | 72 | 4 | 83 Shore D |
What is EOS PA 2200 CarbonReduced?
EOS states that CarbonReduced uses the established PA 2200 technical properties, but the current PA 2200 Balance page does not publish a distinct CarbonReduced test table. This identity remains listed for procurement reference; product-specific properties and the FabDigit reference PDF are withheld pending a separately qualified document.
About this powder
EOS states that CarbonReduced uses the established PA 2200 technical properties, but the current PA 2200 Balance page does not publish a distinct CarbonReduced test table. This identity remains listed for procurement reference; product-specific properties and the FabDigit reference PDF are withheld pending a separately qualified document.
- Manufacturer
- EOS
- Product
- PA 2200 CarbonReduced
- Base polymer
- PA12
- Manufacturer reference
- EOS manufacturer source under review (Status 2026-09-02)
- Ordering
- Reference only. Confirm the exact additive grade and supporting datasheet before requesting this material.
Choosing PA 2200 CarbonReduced
EOS lists CarbonReduced as a responsible-product version of PA 2200 and states that it uses the established PA 2200 technical properties. The current page does not provide a separate CarbonReduced property table, so this entry is a procurement identity rather than an independently reviewed performance profile.
- Consider it for
- PA2200 programs with responsible-procurement reporting · Production fixtures, brackets and covers · Functional prototypes using the established PA2200 workflow
- Tradeoffs
- The product is a sourcing and footprint variant, not a mechanically upgraded grade. The shared PA 2200 page is not distinct CarbonReduced test evidence, and carbon claims still require the current EOS declaration and actual purchased supply route.
- Design and validation
- Qualify the actual printer, build parameters, orientation and conditioning against an approved PA 2200 process. Preserve supplier, region and declaration version in the procurement record, and do not treat this page as a separate CarbonReduced material specification.
- Finishing
- White is the PA2200 as-printed base and dyeing is separate. Confirm that the chosen finishing route and logistics are included in any project-level footprint accounting.
- Before choosing
- Is supplier-documented footprint reduction a formal procurement requirement? Will the engineering release cite the qualified PA 2200 process rather than a generated CarbonReduced specification?
Selection notes based on EOS PA 2200 Balance page with CarbonReduced availability statement. The source limitation above controls whether product-specific performance may be published. Compare material families · Choose a finishing route.
Sources
Product values come from the selected manufacturer source and are normalised for comparison. Confirm the quoted process, build direction, conditioning and available lot documentation for the finished part.