EOS PA 2210 FR (PA12, SLS)
EOS · SLS powder
EOS's PA12 powder for Selective Laser Sintering.
EOS datasheet values, printed parts
Other PA12 grades and fills
Compare the PA12 products and conditions in the library; see the grade overview at PA12.
- HP PA 12 GB
- Farsoon FS3300PA-F
- Formlabs Nylon 12 GF
- Sinterit PA12 Smooth
- FR
- ESD
- Formlabs Nylon 12 Tough
- Evonik INFINAM PA 12 (VESTOSINT)
- Farsoon FS3401GB
- HP PA 12 S
- AL
- HP PA 12 FR
- Farsoon FS3300PA
- EOS PA 2210 FR
- Formlabs Nylon 12 White
- EOS Alumide
- HP PA 12
- EOS PA 2200
- EOS PA 2201
- EOS PA 2220 HighReuse
- EOS PA 2200 CarbonReduced
- ALM PA 640-GSL
- HP PA 12 W
- EOS PrimePart FR (PA 2241 FR)
- Formlabs Nylon 12
- EOS PA 3200 GF
- CF
Compare all 27 grades and fillsHide
| Grade · open for datasheet | Best for | Yield MPa | Tensile MPa | Elong. % | Hardness |
|---|---|---|---|---|---|
HP 3D High Reusability PA 12 GB · MJF powder | A 40% glass-bead-filled PA 12 for stiff, dimensionally stable parts with fine detail and repeatability. | — | 29 | 10 | — |
SLS powder | — | — | 36 | 5 | — |
Formlabs Nylon 12 GF Powder · SLS powder | A glass-filled PA12 powder for rigid, dimensionally stable parts under sustained loading and elevated temperatures. | — | 38 | 4 | — |
SLS powder | — | — | 38 | 4.6 | 76 Shore D |
Flame-retardant PA12 | Use for aircraft interiors, rail and electrical enclosures where V-0 / FAR 25.853 burn compliance is mandatory; slightly lower toughness. | 40 | 44 | 6 | 78 Shore D |
Electrically conductive / static-dissipative PA12 | Choose for electronics handling trays, fixtures and fuel-system parts needing controlled surface resistivity (10⁶–10⁹ Ω). | 41 | 45 | 7 | 78 Shore D |
Formlabs Nylon 12 Tough Powder · SLS powder | A ductile PA12 powder for accurate, impact-resistant parts with reduced warpage and economical powder reuse. | — | 42 | 25 | — |
SLS powder | — | 43 | 49 | 311 | 75 Shore D |
SLS powder | — | — | 44 | 9.3 | — |
HP 3D High Reusability PA 12 S (enabled by Arkema) · MJF powder | A high-reuse PA 12 grade for smooth surfaces, fine detail, and cost-efficient aesthetic production parts. | — | 45 | 12 | — |
Aluminium-filled PA12 | Metallic-look, stiff, easily tumbled/polished parts for tooling aids and design models; better heat conduction, low elongation. | — | 46 | 4 | 80 Shore D |
HP 3D High Reusability PA 12 FR (enabled by Evonik) · MJF powder | A halogen-free flame-retardant PA 12 with a smooth finish for safety-critical housings and production components. | — | 46 | 4.7 | — |
SLS powder | — | — | 46 | 36 | — |
EOS PA 2210 FRThis page SLS powder | — | — | 46 | 4 | — |
Formlabs Nylon 12 White Powder · SLS powder | A white, dyeable PA12 powder for high-contrast prototypes, medical models, and customer-facing end-use parts. | — | 47 | 8 | — |
SLS powder | — | — | 48 | 4 | 76 Shore D |
HP 3D High Reusability PA 12 (enabled by Evonik) · MJF powder | HP's flagship MJF nylon balances strength, ductility, detail, and powder efficiency for functional production parts. | — | 48 | 20 | — |
SLS powder | — | — | 48 | 18 | 75 Shore D |
SLS powder | — | — | 48 | 15 | 75 Shore D |
SLS powder | — | — | 48 | 10 | — |
SLS powder | — | — | 48 | 18 | — |
SLS powder | — | — | 49 | 3 | — |
HP 3D High Reusability PA 12 W · MJF powder | A white engineering PA 12 for strong functional parts that can remain white or take vibrant color finishes. | — | 49 | 17 | — |
SLS powder | — | — | 49 | 15 | — |
Formlabs Nylon 12 Powder · SLS powder | A versatile, biocompatible PA12 powder for dimensionally accurate functional prototypes and durable end-use parts. | — | 50 | 11 | — |
SLS powder | — | — | 51 | 9 | 80 Shore D |
Carbon-fibre reinforced PA12 | Highest stiffness-to-weight powder-bed nylon — for lightweight brackets, drone and motorsport parts; strongly anisotropic and brittle. | — | 72 | 4 | 83 Shore D |
What is EOS PA 2210 FR?
EOS PA 2210 FR is EOS' PA12 powder for Selective Laser Sintering on EOS FORMIGA P 110 / P 396 / P 500 / P 770. EOS PA 2210 FR has a tensile strength of 46 MPa (6.67 ksi), weaker than 51% of polymer grades. Elongation at break is 4% and the elastic modulus is 2.5 GPa (0.363 Msi). EOS PA 2210 FR has a density of 1.06 g/cm³ (0.0383 lb/in³), lighter than 68% of polymer grades.
Limitations
- Limited ductility — 4%, worse than 78% of polymer grades
About this powder
- Manufacturer
- EOS
- Product
- PA 2210 FR
- Base polymer
- PA12
- Process
- Selective Laser Sintering (SLS)
- Printers
- EOS FORMIGA P 110 / P 396 / P 500 / P 770
- As-printed colour
- White — Halogen-free flame retardant
- Build envelope
- 340 × 340 × 600 mm. Usable part size depends on orientation, spacing and process allowances.
- Build atmosphere
- Inert atmosphere specified; confirm the gas and settings for the printer/material profile.
- Reported material classifications
- UL 94 V-0 · FAR 25.853 · EN 45545-2. Scope and test conditions apply; these do not certify the finished part or assembly.
- Manufacturer data source
- EOS source reference
- FabDigit material reference
- Download reference PDF — FabDigit layout with EOS data and source attribution.
- Ordering
- Specify this powder in your quote notes for an availability review.
Choosing PA 2210 FR
A halogen-free flame-retardant PA12 for electrical housings and transport interiors where the cited material fire classifications are relevant to the program.
- Consider it for
- Electrical and electronic housings · Rail ventilation ducts and interior parts · Aircraft-interior concepts requiring an FR material screen
- Tradeoffs
- Flame-retardant PA12 is stiffer and much less ductile than general PA12. Material classifications at stated wall thicknesses do not certify a finished component or assembly.
- Design and validation
- Keep the applicable wall thickness, orientation, conditioning and required test configuration in the design record. Design final certification testing around the actual part, finish and installation.
- Finishing
- The base appearance is white. Confirm any colour treatment for this grade, and review whether it changes the fire-test configuration used for qualification.
- Before choosing
- Which exact fire standard, thickness and end-use configuration governs? Could a non-FR PA12 meet the real mechanical need once the regulatory requirement is clarified?
Selection notes based on EOS PA 2210 FR material data sheet. Published test results depend on the stated printer, orientation and conditioning. Compare material families · Choose a finishing route.
EOS PA 2210 FR properties
Typical values for EOS PA 2210 FR; review each property’s test condition. Only this product’s reported properties are shown; unreported properties are omitted. Bars are the position among polymer grades.
Mechanical6
EOS PA 2210 FR has a tensile strength of 46 MPa (6.67 ksi), weaker than 51% of polymer grades. Elongation at break is 4% and the elastic modulus is 2.5 GPa (0.363 Msi).
per ISO 527-1/-2; Dry: X 2.5 / Y 2.5 / Z 2.3 GPa
per ISO 527-1/-2; Dry: X 46 / Y 46 / Z 41
per ISO 527-1/-2; Dry: X 4 / Y 4 / Z 3
per ISO 178
per ISO 178
per ISO 179/1eA
Physical2
EOS PA 2210 FR has a density of 1.06 g/cm³ (0.0383 lb/in³), lighter than 68% of polymer grades.
per ISO 11357-1/-3
per EOS Method
Thermal3
per ISO 75-1/-2; X 95 / Z 108
per ISO 75-1/-2; X 165 / Z 170
3 mm wall thickness
Use published values for design screening. Confirm the grade, build direction, conditioning and available lot documentation when quoting.
EOS PA 2210 FR — frequently asked
What is EOS PA 2210 FR used for?
A halogen-free flame-retardant PA12 for electrical housings and transport interiors where the cited material fire classifications are relevant to the program. Consider it for electrical and electronic housings, rail ventilation ducts and interior parts and aircraft-interior concepts requiring an FR material screen. Flame-retardant PA12 is stiffer and much less ductile than general PA12. Material classifications at stated wall thicknesses do not certify a finished component or assembly.
What should I validate before using EOS PA 2210 FR?
Keep the applicable wall thickness, orientation, conditioning and required test configuration in the design record. Design final certification testing around the actual part, finish and installation. Which exact fire standard, thickness and end-use configuration governs? Could a non-FR PA12 meet the real mechanical need once the regulatory requirement is clarified?
How can EOS PA 2210 FR be finished?
The base appearance is white. Confirm any colour treatment for this grade, and review whether it changes the fire-test configuration used for qualification.
Sources
Product values come from the selected manufacturer source and are normalised for comparison. Confirm the quoted process, build direction, conditioning and available lot documentation for the finished part.