Farsoon FS3300PA-F (PA12, SLS)
Farsoon · SLS powder
Farsoon's PA12 powder for Selective Laser Sintering.
Farsoon datasheet values, printed parts
Other PA12 grades and fills
Compare the PA12 products and conditions in the library; see the grade overview at PA12.
- HP PA 12 GB
- Farsoon FS3300PA-F
- Formlabs Nylon 12 GF
- Sinterit PA12 Smooth
- FR
- ESD
- Formlabs Nylon 12 Tough
- Evonik INFINAM PA 12 (VESTOSINT)
- Farsoon FS3401GB
- HP PA 12 S
- AL
- HP PA 12 FR
- Farsoon FS3300PA
- EOS PA 2210 FR
- Formlabs Nylon 12 White
- EOS Alumide
- HP PA 12
- EOS PA 2200
- EOS PA 2201
- EOS PA 2220 HighReuse
- EOS PA 2200 CarbonReduced
- ALM PA 640-GSL
- HP PA 12 W
- EOS PrimePart FR (PA 2241 FR)
- Formlabs Nylon 12
- EOS PA 3200 GF
- CF
Compare all 27 grades and fillsHide
| Grade · open for datasheet | Best for | Yield MPa | Tensile MPa | Elong. % | Hardness |
|---|---|---|---|---|---|
HP 3D High Reusability PA 12 GB · MJF powder | A 40% glass-bead-filled PA 12 for stiff, dimensionally stable parts with fine detail and repeatability. | — | 29 | 10 | — |
Farsoon FS3300PA-FThis page SLS powder | — | — | 36 | 5 | — |
Formlabs Nylon 12 GF Powder · SLS powder | A glass-filled PA12 powder for rigid, dimensionally stable parts under sustained loading and elevated temperatures. | — | 38 | 4 | — |
SLS powder | — | — | 38 | 4.6 | 76 Shore D |
Flame-retardant PA12 | Use for aircraft interiors, rail and electrical enclosures where V-0 / FAR 25.853 burn compliance is mandatory; slightly lower toughness. | 40 | 44 | 6 | 78 Shore D |
Electrically conductive / static-dissipative PA12 | Choose for electronics handling trays, fixtures and fuel-system parts needing controlled surface resistivity (10⁶–10⁹ Ω). | 41 | 45 | 7 | 78 Shore D |
Formlabs Nylon 12 Tough Powder · SLS powder | A ductile PA12 powder for accurate, impact-resistant parts with reduced warpage and economical powder reuse. | — | 42 | 25 | — |
SLS powder | — | 43 | 49 | 311 | 75 Shore D |
SLS powder | — | — | 44 | 9.3 | — |
HP 3D High Reusability PA 12 S (enabled by Arkema) · MJF powder | A high-reuse PA 12 grade for smooth surfaces, fine detail, and cost-efficient aesthetic production parts. | — | 45 | 12 | — |
Aluminium-filled PA12 | Metallic-look, stiff, easily tumbled/polished parts for tooling aids and design models; better heat conduction, low elongation. | — | 46 | 4 | 80 Shore D |
HP 3D High Reusability PA 12 FR (enabled by Evonik) · MJF powder | A halogen-free flame-retardant PA 12 with a smooth finish for safety-critical housings and production components. | — | 46 | 4.7 | — |
SLS powder | — | — | 46 | 36 | — |
SLS powder | — | — | 46 | 4 | — |
Formlabs Nylon 12 White Powder · SLS powder | A white, dyeable PA12 powder for high-contrast prototypes, medical models, and customer-facing end-use parts. | — | 47 | 8 | — |
SLS powder | — | — | 48 | 4 | 76 Shore D |
HP 3D High Reusability PA 12 (enabled by Evonik) · MJF powder | HP's flagship MJF nylon balances strength, ductility, detail, and powder efficiency for functional production parts. | — | 48 | 20 | — |
SLS powder | — | — | 48 | 18 | 75 Shore D |
SLS powder | — | — | 48 | 15 | 75 Shore D |
SLS powder | — | — | 48 | 10 | — |
SLS powder | — | — | 48 | 18 | — |
SLS powder | — | — | 49 | 3 | — |
HP 3D High Reusability PA 12 W · MJF powder | A white engineering PA 12 for strong functional parts that can remain white or take vibrant color finishes. | — | 49 | 17 | — |
SLS powder | — | — | 49 | 15 | — |
Formlabs Nylon 12 Powder · SLS powder | A versatile, biocompatible PA12 powder for dimensionally accurate functional prototypes and durable end-use parts. | — | 50 | 11 | — |
SLS powder | — | — | 51 | 9 | 80 Shore D |
Carbon-fibre reinforced PA12 | Highest stiffness-to-weight powder-bed nylon — for lightweight brackets, drone and motorsport parts; strongly anisotropic and brittle. | — | 72 | 4 | 83 Shore D |
What is Farsoon FS3300PA-F?
Farsoon FS3300PA-F is Farsoon's PA12 powder for Selective Laser Sintering on Farsoon 402P / HT403P. Farsoon FS3300PA-F has a tensile strength of 36 MPa (5.22 ksi), weaker than 57% of polymer grades. Elongation at break is 5% and the elastic modulus is 1.6 GPa (0.232 Msi). Farsoon FS3300PA-F has a density of 1 g/cm³ (0.0361 lb/in³), lighter than 73% of polymer grades.
About this powder
- Manufacturer
- Farsoon
- Product
- FS3300PA-F
- Base polymer
- PA12
- Process
- Selective Laser Sintering (SLS)
- Printers
- Farsoon 402P / HT403P
- As-printed colour
- Black — Optimized for fiber-laser absorption
- Build envelope
- 375 × 375 × 430 mm. Usable part size depends on orientation, spacing and process allowances.
- Build atmosphere
- Inert atmosphere specified; confirm the gas and settings for the printer/material profile.
- Manufacturer data source
- Farsoon source reference (V02 2021-02-03)
- FabDigit material reference
- Download reference PDF — FabDigit layout with Farsoon data and source attribution.
- Ordering
- Specify this powder in your quote notes for an availability review.
Farsoon FS3300PA-F properties
Typical values for Farsoon FS3300PA-F (V02 2021-02-03); review each property’s test condition. Only this product’s reported properties are shown; unreported properties are omitted. Bars are the position among polymer grades.
Manufacturability1
per DIN EN ISO 60; Published range
Physical2
Farsoon FS3300PA-F has a density of 1 g/cm³ (0.0361 lb/in³), lighter than 73% of polymer grades.
per GB/T 1033
per ISO 11357; Published range
Thermal2
per GB/T 1040.2-2006; Published range
per GB/T 1040.2-2006; Published range
Mechanical5
Farsoon FS3300PA-F has a tensile strength of 36 MPa (5.22 ksi), weaker than 57% of polymer grades. Elongation at break is 5% and the elastic modulus is 1.6 GPa (0.232 Msi).
per GB/T 1040.2-2006; Published range
per GB/T 1040.2-2006; Published range
per GB/T 1040.2-2006; Published range
per GB/T 1040.2-2006; Published range
per GB/T 1040.2-2006; Published range
Use published values for design screening. Confirm the grade, build direction, conditioning and available lot documentation when quoting.
Sources
Product values come from the selected manufacturer source and are normalised for comparison. Confirm the quoted process, build direction, conditioning and available lot documentation for the finished part.