Stainless Steel
Stainless Steel CD3MN
Stainless Steel CD3MN is a stainless steel.
PropertiesAbout these values
- Typical room-temperature values for the default supply condition.
- Bars show where CD3MN sits against the other stainless steel grades in the catalog (shaded band = 10th–90th percentile, tick = median).
- Confirm against the certified mill / resin datasheet before design release.
About these values
- Typical room-temperature values for the default supply condition.
- Bars show where CD3MN sits against the other stainless steel grades in the catalog (shaded band = 10th–90th percentile, tick = median).
- Confirm against the certified mill / resin datasheet before design release.
Datasheet
Values are nominal handbook figures for design screening. Certified mill or lot data ships with every FabDigit order on request.
Against other stainless steel grades
Strength versus weight in the stainless steel family
Yield strength against density for every stainless steel grade FabDigit runs. CD3MN is highlighted; hover a dot for its name, or open the interactive family chart.
Surface finishes for CD3MN
Coatings and treatments compatible with stainless steel on the processes CD3MN runs on. Pick them in the quote configurator or call them out on the drawing.
Passivation
- Pickling
Plating
- Electroless Nickel (EN)
- Gold Plating
- Hard Chrome Plating
- Silver Plating
Organic Coating
- Epoxy Coating
Thermal Spray
- Plasma Spray
Equivalent designations
Standards and trade names that resolve to Stainless Steel CD3MN in FabDigit's catalog. Equivalence is nominal — check the exact specification when certification matters.
- UNS
- J92205
- ASTM
- A890 Grade 1AA890 Grade 4AA995 Grade 4A
- EN / DIN / Werkstoff-Nr.
- 1.4470GX2CrNiMoN22-5-3GX2CrNiMoN26-7-4
- Also called
- 铸造2205双相不锈钢J92205铸钢2205铸造双相钢
Property data is compiled from published supplier and standards handbooks and normalised for comparison; hardness values on non-Brinell scales are converted approximately for charting only. Manufacturability limits are FabDigit quote-engine defaults and may be relaxed by engineering review. Nothing on this page is a certification — request mill certs, CoC or material test reports with your order.