EOS PP 1101 (PP-H, SLS)
EOS · SLS powder · discontinued
EOS's PP-H powder for Selective Laser Sintering.
EOS datasheet values, printed parts
Other PP-H grades and fills
Compare the PP-H products and conditions in the library; see the grade overview at PP-H.
Compare all 11 grades and fillsHide
| Grade · open for datasheet | Best for | Yield MPa | Tensile MPa | Elong. % | Hardness |
|---|---|---|---|---|---|
Impact-modified (elastomer-toughened) PP homopolymer | Use where PP-H's notch and sub-zero brittleness is the limiting factor but homopolymer stiffness/cost is still wanted. | 25 | 26 | 450 | 64 Shore D |
flame-retardant PP homopolymer | Halogen-free or brominated FR compound for electrical housings and battery components requiring V-0 at 1.6 mm. | 26 | 26 | 15 | 70 Shore D |
ESD / conductive carbon-filled PP homopolymer | Carbon-black or carbon-fiber loaded compound for electronics trays, fuel-handling and explosion-risk areas needing static dissipation. | 29 | 30 | 6 | 74 Shore D |
Formlabs Polypropylene Powder · SLS powder | A chemically resistant polypropylene powder for ductile prototypes and end-use parts that repeatedly bend and flex. | — | 29 | 34 | — |
MF40 | Low-cost stiffening and dimensional-stability filler for appliance and automotive interior parts where glass fiber's anisotropy and surface roughness are unacceptable. | 30 | 30 | 10 | — |
HP 3D High Reusability PP (enabled by Forward AM / BASF) · MJF powder | A genuine polypropylene for chemical-resistant, weldable, low-moisture functional parts at production scale. | — | 30 | 20 | — |
UNFDefault Unfilled / natural PP homopolymer | Standard choice for general injection molding, sheet, pipe and chemical tanks where stiffness and chemical resistance matter more than low-temperature impact. | 34 | 35 | 300 | 72 Shore D |
High-crystallinity / high-stiffness homopolymer | Nucleated high-crystallinity homopolymer for thin-wall packaging and high-modulus unfilled parts with faster cycle times. | 40 | 40 | 60 | — |
20 % coupled glass-fiber reinforced PP homopolymer | Pick when about double the stiffness and much better heat distortion resistance are needed while keeping moderate cost and moldability. | — | 75 | 3 | 78 HRM |
40 % coupled glass-fiber reinforced PP homopolymer | Highest stiffness/strength PP compound for semi-structural brackets, pump housings and under-hood parts replacing low-end nylon. | — | 105 | 2.5 | 85 HRM |
EOS PP 1101This page SLS powder | — | — | — | — | — |
What is EOS PP 1101?
EOS PP 1101 is EOS' PP-H powder for Selective Laser Sintering on EOS FORMIGA P 110 / P 396 / P 500 / P 770. EOS PP 1101 has a density of 0.895 g/cm³ (0.0323 lb/in³), lighter than 82% of polymer grades.
Advantages
- Lightweight — 0.895 g/cm³ (0.0323 lb/in³), better than 82% of polymer grades
About this powder
- Manufacturer
- EOS
- Product
- PP 1101
- Base polymer
- PP-H
- Process
- Selective Laser Sintering (SLS)
- Printers
- EOS FORMIGA P 110 / P 396 / P 500 / P 770
- As-printed colour
- Natural
- Build envelope
- 340 × 340 × 600 mm. Usable part size depends on orientation, spacing and process allowances.
- Build atmosphere
- Inert atmosphere specified; confirm the gas and settings for the printer/material profile.
- Manufacturer data source
- EOS source reference
- FabDigit material reference
- Download reference PDF — FabDigit layout with EOS data and source attribution.
- Ordering
- Discontinued by EOS; kept for reference and existing designs.
EOS PP 1101 properties
Typical values for EOS PP 1101; review each property’s test condition. Only this product’s reported properties are shown; unreported properties are omitted. Bars are the position among polymer grades.
Physical1
EOS PP 1101 has a density of 0.895 g/cm³ (0.0323 lb/in³), lighter than 82% of polymer grades.
per EOS Method
Use published values for design screening. Confirm the grade, build direction, conditioning and available lot documentation when quoting.
Sources
Product values come from the selected manufacturer source and are normalised for comparison. Confirm the quoted process, build direction, conditioning and available lot documentation for the finished part.