Precious Metal 835 Silver vs 950 Silver (Minerve)
Precious Metal · grade comparison
Precious Metal 835 Silver and 950 Silver (Minerve) are both precious metal grades. 835 Silver is the stronger of the two: yield strength 110 MPa (16 ksi) against 65 MPa (9.43 ksi) for 950 Silver (Minerve), about 69% more; tensile strength follows at 300 MPa (43.5 ksi) vs 250 MPa (36.3 ksi). In exchange, 950 Silver (Minerve) is the more ductile: elongation 45% versus 40% for 835 Silver, and 835 Silver is harder (57 HB vs 52 HB). 835 Silver is stiffer (80 GPa vs 76 GPa) and 950 Silver (Minerve) conducts heat better (380 W/m·K vs 320 W/m·K). On the shop floor, 950 Silver (Minerve) machines more easily (good vs fair) and 950 Silver (Minerve) welds better (very good vs good).
835 SilverChoose it when strength drives the design.
950 Silver (Minerve)Choose it when the part is bent, formed or impact-loaded, or when the part is machined in volume.
835 Silver vs 950 Silver (Minerve): propertiesHow to read these bars
- One bar per material. A full bar is the highest value among all precious metal grades in the FabDigit library; each bar is drawn as a share of that.
- The better value (by the usual engineering direction) is in bold. Rows with no direction — density, thermal conductivity — have no bold.
- Values are typical room-temperature figures for the condition named on each card.
- Confirm against the certified mill or resin datasheet before design release.
How to read these bars
- One bar per material. A full bar is the highest value among all precious metal grades in the FabDigit library; each bar is drawn as a share of that.
- The better value (by the usual engineering direction) is in bold. Rows with no direction — density, thermal conductivity — have no bold.
- Values are typical room-temperature figures for the condition named on each card.
- Confirm against the certified mill or resin datasheet before design release.
835 Silver950 Silver (Minerve)
Mechanical
Strength, stiffness, ductility and hardness at room temperature.
Elastic (Young's) Modulus
Shear Modulus
Bulk Modulus
Tensile Strength (Ultimate)
Yield Strength (0.2% offset)
Elongation at Break
Shear Strength
Fatigue Strength (Endurance Limit)
Hardness, Brinell
Hardness, Vickers
Same in both: Poisson's Ratio 0.37
Physical
Density and transition temperatures.
Density
Melting Point (Solidus)
Liquidus Temperature
Thermal
How each material carries heat and how hot it can run.
Thermal Conductivity
Specific Heat Capacity
Latent Heat of Fusion
Min Service Temperature
Same in both: Thermal Expansion (CTE, 20–100 °C) 19 µm/m·K10.6 µin/in·°F · Max Service Temperature (continuous) 200°C392 °F
Electrical
Conductivity and insulation.
Electrical Conductivity
Electrical Resistivity
Chemical & Environmental
Corrosion and environmental resistance (0–100 scores).
Galvanic Potential (seawater, vs SCE)
Corrosion Resistance
Manufacturability
FabDigit workshop ratings (0–100 scores) — how each material behaves on the machine.
Machinability
Weldability
Formability (cold)
Castability
Brazeability / Solderability
Polishability
Same in both: Machinability Rating (AISI 1212 = 100 %) 55%
Sustainability
Primary-production footprint per kilogram.
Embodied Energy (primary production)
Embodied Water
Typical Recycled Content
Same in both: Embodied Carbon (primary production) 105 kg CO₂/kg
Common Calculations
Ratios derived from the values above.
Specific Strength (UTS / density)
Specific Stiffness (E / density)
Modulus of Resilience
Thermal Diffusivity
Thermal Shock Resistance Index
Strength versus weight
Yield strength against density for every precious metal grade in the FabDigit library; the compared grades are highlighted. Up and left is stronger for its weight.
Manufacturing and finishing
| Capability | 835 Silver | 950 Silver (Minerve) |
|---|---|---|
| Default condition | — | — |
| Relative cost | $$$$ High | $$$$ High |
| Min. machined wall | — | — |
| Best machined surface | — | — |
835 Silver vs 950 Silver (Minerve) — frequently asked
Is 835 Silver stronger than 950 Silver (Minerve)?
Yes. 835 Silver has a typical yield strength of 110 MPa (16 ksi) against 65 MPa (9.43 ksi) for 950 Silver (Minerve) — about 69% more. Tensile strength is 300 MPa (43.5 ksi) vs 250 MPa (36.3 ksi).
Which is cheaper, 835 Silver or 950 Silver (Minerve)?
Both sit in the same relative cost tier ($$$$, high); the part price will be decided by machining time, tolerance and quantity rather than by the material.
Which is easier to machine, 835 Silver or 950 Silver (Minerve)?
950 Silver (Minerve). Its machinability rates good (60/100) against fair (50/100) for 835 Silver; for welding the order is 950 Silver (Minerve) first (very good, 70/100) then 835 Silver (good, 60/100).
Ready to make it?
Upload a CAD file and FabDigit prices the part in 835 Silver and 950 Silver (Minerve) side by side — material, machining time, tolerance and finish in one quote. Certified material data ships with the order on request.
Typical handbook values for the conditions named above, normalised for comparison. Hardness on non-Brinell scales is converted approximately for charting only. Request certified data with your order for design-critical properties.