EvoLVe 128 vs Formlabs Tough 2000
Polymer · grade comparison
EvoLVe 128 and Tough 2000 are both polymer grades, both engineering plastic. On the shop floor, Tough 2000 sits in a lower cost tier (standard, $$) than EvoLVe 128 (premium, $$$).
Tough 2000Choose it when cost is the deciding factor.
EvoLVe 128 vs Tough 2000: propertiesHow to read these bars
- One bar per material. A full bar is the highest value among all polymer grades in the FabDigit library; each bar is drawn as a share of that.
- The better value (by the usual engineering direction) is in bold. Rows with no direction — density, thermal conductivity — have no bold.
- Values are typical room-temperature figures for the condition named on each card.
- Confirm against the certified mill or resin datasheet before design release.
How to read these bars
- One bar per material. A full bar is the highest value among all polymer grades in the FabDigit library; each bar is drawn as a share of that.
- The better value (by the usual engineering direction) is in bold. Rows with no direction — density, thermal conductivity — have no bold.
- Values are typical room-temperature figures for the condition named on each card.
- Confirm against the certified mill or resin datasheet before design release.
Properties
Yield strength
Elongation at break
Elastic modulus (Young's)
Density
Max service temp
Thermal conductivity
Machinability
Formability
Same in both: Tensile strength 50 MPa7.3 ksi · Electrical conductivity 0 % IACS · Weldability 5 / 100
Strength versus weight
Yield strength against density for every polymer grade in the FabDigit library; the compared grades are highlighted. Up and left is stronger for its weight.
Manufacturing and finishing
| Capability | EvoLVe 128 | Tough 2000 |
|---|---|---|
| Default condition | — | ABS-like |
| Relative cost | $$$ Premium | $$ Standard |
| Min. machined wall | — | — |
| Best machined surface | — | — |
Both are offered for Injection molding and 3D printing. Both take the same 12 finishes: Chrome Plating (Plastic), Conductive Coating, Dyeing (Nylon), EMI Shielding Coating, Painting, Primer Coating, Soft Touch Coating, Spray Painting, Tinted Coating, UV Coating, Vacuum Metallization, Waterproof Coating.
EvoLVe 128 vs Tough 2000 — frequently asked
What is the difference between EvoLVe 128 and Tough 2000?
EvoLVe 128 and Tough 2000 are both polymer grades, both engineering plastic. On the shop floor, Tough 2000 sits in a lower cost tier (standard, $$) than EvoLVe 128 (premium, $$$).
Which is cheaper, EvoLVe 128 or Tough 2000?
Tough 2000 is the lower-cost material: it sits in the standard tier ($$) while EvoLVe 128 is premium ($$$). Part price depends far more on geometry, tolerance and quantity than on raw stock — upload a CAD file for a live quote.
When should I choose EvoLVe 128 over Tough 2000?
Pick Tough 2000 when cost is the deciding factor.
Ready to make it?
Upload a CAD file and FabDigit prices the part in EvoLVe 128 and Tough 2000 side by side — material, machining time, tolerance and finish in one quote. Certified material data ships with the order on request.
Typical handbook values for the conditions named above, normalised for comparison. Hardness on non-Brinell scales is converted approximately for charting only. Request certified data with your order for design-critical properties.