Copper Alloy C26000 vs C36000
Copper Alloy · grade comparison
Copper Alloy C26000 and C36000 are both copper alloy grades. C36000 is the stronger of the two: yield strength 310 MPa (45 ksi) against 105 MPa (15.2 ksi) for C26000, about 195% more; tensile strength follows at 385 MPa (55.8 ksi) vs 325 MPa (47.1 ksi). In exchange, C26000 is the more ductile: elongation 62% versus 22% for C36000, and C36000 is harder (115 HB vs 55 HB). C26000 is stiffer (110 GPa vs 97 GPa). On the shop floor, C36000 machines more easily (excellent vs poor), C26000 welds better (fair vs poor), and C36000 sits in a lower cost tier (premium, $$$) than C26000 (high, $$$$).
C26000Choose it when the part is bent, formed or impact-loaded, or when it will be welded.
C36000Choose it when strength drives the design, or when the part is machined in volume.
C26000 vs C36000: propertiesHow to read these bars
- One bar per material. A full bar is the highest value among all copper alloy grades in the FabDigit library; each bar is drawn as a share of that.
- The better value (by the usual engineering direction) is in bold. Rows with no direction — density, thermal conductivity — have no bold.
- Values are typical room-temperature figures for the condition named on each card.
- Confirm against the certified mill or resin datasheet before design release.
How to read these bars
- One bar per material. A full bar is the highest value among all copper alloy grades in the FabDigit library; each bar is drawn as a share of that.
- The better value (by the usual engineering direction) is in bold. Rows with no direction — density, thermal conductivity — have no bold.
- Values are typical room-temperature figures for the condition named on each card.
- Confirm against the certified mill or resin datasheet before design release.
Mechanical
Strength, stiffness, ductility and hardness at room temperature.
Elastic (Young's) Modulus
Shear Modulus
Bulk Modulus
Poisson's Ratio
Tensile Strength (Ultimate)
Yield Strength (0.2% offset)
Elongation at Break
Shear Strength
Fatigue Strength (Endurance Limit)
Hardness, Brinell
Hardness, Vickers
Reduction in Area
Charpy V-Notch Impact (RT)
Hardness, Rockwell B
Physical
Density and transition temperatures.
Density
Melting Point (Solidus)
Liquidus Temperature
Thermal
How each material carries heat and how hot it can run.
Thermal Conductivity
Specific Heat Capacity
Thermal Expansion (CTE, 20–100 °C)
Latent Heat of Fusion
Same in both: Max Service Temperature (continuous) 200°C392 °F · Min Service Temperature -200°C-328 °F
Electrical
Conductivity and insulation.
Electrical Conductivity
Electrical Resistivity
Chemical & Environmental
Corrosion and environmental resistance (0–100 scores).
Galvanic Potential (seawater, vs SCE)
Corrosion Resistance
Manufacturability
FabDigit workshop ratings (0–100 scores) — how each material behaves on the machine.
Machinability
Machinability Rating (AISI 1212 = 100 %)
Weldability
Formability (cold)
Castability
Brazeability / Solderability
Polishability
Sustainability
Primary-production footprint per kilogram.
Embodied Energy (primary production)
Embodied Carbon (primary production)
Embodied Water
Typical Recycled Content
Common Calculations
Ratios derived from the values above.
Specific Strength (UTS / density)
Specific Stiffness (E / density)
Modulus of Resilience
Thermal Diffusivity
Thermal Shock Resistance Index
Strength versus weight
Yield strength against density for every copper alloy grade in the FabDigit library; the compared grades are highlighted. Up and left is stronger for its weight.
Manufacturing and finishing
| Capability | C26000 | C36000 |
|---|---|---|
| Sheet metal | Yes | — |
| Default condition | O | H02 |
| Relative cost | $$$$ High | $$$ Premium |
| Min. machined wall | 0.8 mm | 0.5 mm |
| Best machined surface | Ra 1.6 µm | Ra 0.8 µm |
Both are offered for CNC machining. Both take the same 9 finishes: Chrome Plating, Copper Plating, Electroless Nickel (EN), Electropolishing, Gold Plating, Nickel Plating, Painting, Silver Plating, Tin Plating.
C26000 vs C36000 — frequently asked
Is C36000 stronger than C26000?
Yes. C36000 has a typical yield strength of 310 MPa (45 ksi) against 105 MPa (15.2 ksi) for C26000 — about 195% more. Tensile strength is 385 MPa (55.8 ksi) vs 325 MPa (47.1 ksi).
Which is cheaper, C26000 or C36000?
C36000 is the lower-cost material: it sits in the premium tier ($$$) while C26000 is high ($$$$). Part price depends far more on geometry, tolerance and quantity than on raw stock — upload a CAD file for a live quote.
Which is easier to machine, C26000 or C36000?
C36000. Its machinability rates excellent (100/100) against poor (30/100) for C26000; for welding the order is C26000 first (fair, 40/100) then C36000 (poor, 20/100).
Ready to make it?
Upload a CAD file and FabDigit prices the part in C26000 and C36000 side by side — material, machining time, tolerance and finish in one quote. Certified material data ships with the order on request.
Typical handbook values for the conditions named above, normalised for comparison. Hardness on non-Brinell scales is converted approximately for charting only. Request certified data with your order for design-critical properties.