FabDigitFabDigit

SendCutSend alternatives: 7 sheet metal services compared.

What SendCutSend does well, the published limits a part can outgrow, and FabDigit, OSH Cut, Fabworks, Xometry, Protolabs, Fictiv and Ponoko on identical columns — materials, finishes and heat treatment, price policy, inspection, lead time.

Facts checked September 13, 2026 on each vendor’s site · Same columns for every platform · FabDigit runs this site

Upload DXF or STEP — instant FabDigit quoteBest online sheet metal services

What SendCutSend does well

Read from sendcutsend.com on September 13, 2026. For a flat or simply bent part needed in 24 hours it is the fastest route, and the table below says so.

Own shops, published prices

Own factories — every part is cut, bent and finished on SendCutSend equipment in its six US facilities, nothing outsourced. Example prices are published with volume discounts to 80 %, savings from two parts.

Materials and speed

175+ sheet materials in stock, 0.015–2.25" thick; 10 bendable materials. Ships in 2–4 business days; bending +1–2, powder coat +3–5, plating +7–10 days; ships within 24 hours (fastest tier, order by noon pt).

Shipping and guarantee

Free US shipping from $39 including LTL freight; Canada from $19. Money-back guarantee — refund or remake.

Tolerances

Laser ±0.005" under 12" (±0.010" over); waterjet ±0.009"; bends ±1°, bend-to-edge ±0.015".

When a part outgrows SendCutSend

Each limit is from SendCutSend’s own service pages; the alternatives are the platforms whose published capabilities cover it.

  1. Geometry. Cuts are 2D perpendicular only — no V-grooves, contours or partial-depth cuts. OSH Cut has the same 2D limit; for chamfers, pockets or 3D contours the part is a CNC job at FabDigit, Xometry or Protolabs.
  2. Forming. Bends to 130° only; no hems, coining, curls or roll forming; no custom bend radii. Hems and coining are quoted at FabDigit, Protolabs (5-day tier) and Xometry (manual quote); Fabworks bends to 135°.
  3. Machining. CNC machining limited to 6061 billet, 7 × 7 × 12 in, ±0.005" fixed. FabDigit, Xometry and Protolabs mill and turn steels, stainless, titanium and plastics to drawing tolerances.
  4. Certifications and reach. No ISO 9001, AS9100 or ITAR published; ships to the US and Canada only. Protolabs, Xometry and OSH Cut publish ISO 9001; FabDigit’s partners hold ISO 9001:2015 and FabDigit accepts international orders.
  5. Cosmetic parts. “We don’t offer special protection for cosmetic parts” — the same applies at OSH Cut. For visible surfaces, FabDigit, Protolabs and Xometry quote the finish together with an inspection level.

Pick by situation

Your situationStart withWhy
Same kind of part, thicker plate or tubeOSH CutAlso consider: Fabworks (tube laser)Steel and aluminum to 1" thick, stainless to 5/8", tube laser to 10" diameter; instant quote, 2-day standard, ISO 9001.
Part is bigger than 30 × 44 inFabworksAlso consider: OSH Cut (bends to 119"); Xometry (5 × 10 ft blanks)Sheets to 60 × 120 in, bends to 96" long, next day when ordered before 9 am PT.
Needs hems, bends past 130°, coining or a rolled edgeFabDigitAlso consider: Protolabs 5-day tier (hems); Xometry (manual quote)SendCutSend publishes no hems, coining, curls or roll forming and a 130° maximum bend. FabDigit quotes coining and hems with an engineer checking the bend order.
Welded enclosure with hardware and powder coatFabDigitAlso consider: Xometry; Protolabs (welding +1 day, powder coat +2)SendCutSend welds only to close seams and lists anodize, zinc / nickel plating and 15 powder coats. FabDigit prices cut, bend, PEM hardware, weld and any of 150+ finishes on one line with first-article inspection.
Plating, anodize type III, e-coat, passivation or heat treatmentFabDigitAlso consider: Xometry (59 sheet finish options)SendCutSend’s finish list stops at anodize, zinc and nickel plating, powder coat and tumbling, with no heat treatment. FabDigit quotes 150+ finishes and 30 heat treatments per line; OSH Cut lists deburr, blast and powder coat only.
A lower price on the same drawingFabDigitAlso consider: SendCutSend volume discounts to 80 % from two partsFabDigit prints a price-beat offer on every quote: send the SendCutSend quote for the same part, quantity, material, bends and finish and it is almost always beaten. SendCutSend publishes prices but no match policy.
Real CNC machining, not 6061 billet onlyFabDigitAlso consider: Xometry; ProtolabsSendCutSend machines 6061-T6 only, 7 × 7 × 12 in, ±0.005" fixed. FabDigit instant-quotes 790 grades — steels, stainless, titanium, copper alloys, plastics — with 30 heat treatments, to ±0.025 mm standard and ±0.005 mm on critical features.
ISO 9001 / AS9100 / ITAR paperwork requiredProtolabsAlso consider: Xometry (AS9100D, ITAR); OSH Cut (ISO 9001); FabDigit (ISO 9001 partners, FAI, mill certs)SendCutSend publishes no certifications and cannot guarantee material cert accuracy. Protolabs sheet metal is ISO 9001 and ITAR with FAI available.
Shipping outside the US and CanadaXometryAlso consider: Protolabs Network (EU / UK duties covered); FabDigit (international accepted); PonokoSendCutSend ships to the US and Canada only and makes no exceptions.
Flat part, a few pieces, needed in 24 hoursSendCutSendAlso consider: OSH Cut; FabDigit if price matters more than the 24-hour tier (price-beat on the same DXF)Published prices, 175+ stocked materials, free US shipping from $39 and a 24-hour tier from its own shops — the fastest route for a simple flat part.

Deciding between the two? The FabDigit vs SendCutSend page puts them in two columns, row by row — and FabDigit vs OSH Cut does the same for the other own-shop specialist.

SendCutSend and the seven, side by side

PlatformMaterialsFinishes & heat treatmentPrice policyInspection & certificatesStandard lead timeSheet metal tolerance
SendCutSend175+ sheet materialsAnodize, Zn / Ni plating, 15 powder coatsPublished prices; volume −80 %MTRs on request, accuracy not guaranteedShips in 2–4 days±0.005" laser · ±1° bends
FabDigitthis site790 grades, all quotable150+ finishes · 30 heat treatmentsPrice-beat on every quote4 inspection levels · 8 certificates, per line5–7 business days±0.1 mm · ±0.5° bends
OSH Cut500+ sheet, plate, tubeDeburr, blast, powder coat; no platingInstant; auto volume discountsNot published2 days, guaranteed±0.005" standard
FabworksSteel, stainless, aluminum onlyTapping, PEM; powder coat via partnerInstant; no match policyNot published1–2 days simple orders±0.002–0.005" laser · ±1°
Xometry50+ CNC materials65 CNC · 59 sheet finish optionsInstant; no match policyStandard incl.; FAIR, CMM optional3–7 business days±0.015" edge-to-bend · ±1°
Protolabs30+ CNC materialsAnodize, chromate, bead blast, powder coatExpedite / Standard / Economy tiersUp to AS9102 FAI3 days; Economy 7–18±0.005" edge · ±1°
Fictiv45+ CNC materials28 CNC · 34 sheet finish optionsInstant; 5 qty tiers; no match policyFree dimensional report; FAI, PPAP extraCNC 1–10 daysAs low as ±0.005"
Ponoko250+ incl. plastics, woodNot publishedPublished: from $50; −93 % at 10kNot publishedNot published±0.13 mm

The seven alternatives

FabDigit first — we run this site and say so. The other six follow by how many SendCutSend buyers each one fits: the like-for-like own-shop services first, then the platforms for parts that need more than cut and bend.

01 · our pick

FabDigit

Dublin, California, USA · founded 2025 · Private (FABDIGIT INC., California corporation)

Best for: the part that stopped being a flat bracket: hems, welds, PEM hardware, any of 150+ finishes (anodize, plating, e-coat, powder coat, passivation) and heat treatment priced on one line, an engineer checking the flat pattern, 4 inspection levels in the form, real CNC in any grade — and a price-beat offer against the SendCutSend quote.

Materials
790 grades, all quotable
Finishes & heat treatment
150+ finishes · 30 heat treatments
Price policy
Price-beat on every quote
Inspection & certificates
4 inspection levels · 8 certificates, per line
Standard lead time
5–7 business days
Sheet metal tolerance
±0.1 mm · ±0.5° bends

Strengths

  • 790-grade material library — the largest published among these platforms — every grade quotable
  • 150+ finishes, 30 heat treatments and 33 post-processes priced in the quote, not by email
  • Price-beat policy printed on every quote: send a lower quote for the same part and FabDigit beats it

Limits

  • Founded 2025 — a young company; references on request rather than a long public record
  • Parts are made in a vetted partner network; FABDIGIT INC. is the contracting party and quality reviewer

Company facts · checked September 13, 2026

02

OSH Cut

Spanish Fork, Utah, USA (second facility in Burlington, Kentucky) · founded 2018 · Private

Best for: the same instant, own-shop model with plate to 1", tube laser, bends to 119" and ISO 9001 — the nearest like-for-like alternative.

Materials
500+ sheet, plate, tube
Finishes & heat treatment
Deburr, blast, powder coat; no plating
Price policy
Instant; auto volume discounts
Inspection & certificates
Not published
Standard lead time
2 days, guaranteed
Sheet metal tolerance
±0.005" standard

Strengths

  • Plate to 1" thick and tube laser in the same quote
  • Two-day standard with the selected lead time guaranteed
  • ISO 9001:2015 certified

Limits

  • No CNC machining and no welding
  • Cosmetic parts are not protected — minor marks are expected

oshcut.com · checked September 13, 2026

03

Fabworks

Ventura, California, USA · founded 1980 · Private (Sessa Manufacturing and Welding, Inc., d/b/a Fabworks)

Best for: parts larger than SendCutSend’s 30 × 44 in standard envelope — 96" bends, 96 × 47 in blanks — with next-day production.

Materials
Steel, stainless, aluminum only
Finishes & heat treatment
Tapping, PEM; powder coat via partner
Price policy
Instant; no match policy
Inspection & certificates
Not published
Standard lead time
1–2 days simple orders
Sheet metal tolerance
±0.002–0.005" laser · ±1°

Strengths

  • 96" bend length and 96 × 47 in parts — larger than SendCutSend publishes
  • Next-day production on small orders
  • Tube laser cutting

Limits

  • Limited material list by design
  • No CNC machining; welding and anodizing listed as coming

fabworks.com · checked September 13, 2026

04

Xometry

North Bethesda, Maryland, USA · founded 2013 · Public (Nasdaq: XMTR)

Best for: sheet metal inside a larger order — CNC, molding, casting — with ITAR, AS9100D and 5 × 10 ft blanks; welded assemblies by manual quote.

Materials
50+ CNC materials
Finishes & heat treatment
65 CNC · 59 sheet finish options
Price policy
Instant; no match policy
Inspection & certificates
Standard incl.; FAIR, CMM optional
Standard lead time
3–7 business days
Sheet metal tolerance
±0.015" edge-to-bend · ±1°

Strengths

  • Widest process range of any platform here, all in one quoting engine
  • Full compliance stack: ISO 9001 / 13485, AS9100D, IATF 16949, ITAR, CMMC L2
  • Free standard shipping on US orders

Limits

  • The shop that makes the part is not disclosed
  • Custom materials, threads, hems and welded assemblies fall out of the instant quote into manual review

xometry.com · checked September 13, 2026

05

Protolabs

Maple Plain, Minnesota, USA · founded 1999 · Public (NYSE: PRLB)

Best for: a certified prototype on a 3-day or 5-day tier from its own ISO 9001 / ITAR factory, with hems and FAI available.

Materials
30+ CNC materials
Finishes & heat treatment
Anodize, chromate, bead blast, powder coat
Price policy
Expedite / Standard / Economy tiers
Inspection & certificates
Up to AS9102 FAI
Standard lead time
3 days; Economy 7–18
Sheet metal tolerance
±0.005" edge · ±1°

Strengths

  • Parts made in Protolabs-owned factories — repeatable process, one QMS
  • 1-day CNC and sheet metal with published expedite tiers
  • Inspection options up to AS9102 FAI on the quote

Limits

  • Factory milling envelope 22 × 14 × 3.75 in — larger parts route to the Network
  • Quotes arrive within hours, not seconds

protolabs.com · checked September 13, 2026

06

Fictiv

Oakland, California, USA (offices in Phoenix, Guangzhou, Bengaluru, Pune, Monterrey) · founded 2013 · Owned by MISUMI Group (acquired 2025 for $350 million)

Best for: managed sheet metal programs with pre-order DFM, up to five quantity tiers and stock to 0.375".

Materials
45+ CNC materials
Finishes & heat treatment
28 CNC · 34 sheet finish options
Price policy
Instant; 5 qty tiers; no match policy
Inspection & certificates
Free dimensional report; FAI, PPAP extra
Standard lead time
CNC 1–10 days
Sheet metal tolerance
As low as ±0.005"

Strengths

  • Four manufacturing regions — tariff and capacity resilience
  • Free dimensional inspection report on CNC parts
  • Up to five quantity tiers in a single quote

Limits

  • Does not support ITAR parts or projects
  • Ships to the US and Canada only

fictiv.com · checked September 13, 2026

07

Ponoko

Oakland, California, USA (founded in Wellington, New Zealand) · founded 2007 · Private

Best for: acrylic, wood, composites and thin metal cut the same day, and buyers outside the US and Canada.

Materials
250+ incl. plastics, wood
Finishes & heat treatment
Not published
Price policy
Published: from $50; −93 % at 10k
Inspection & certificates
Not published
Standard lead time
Not published
Sheet metal tolerance
±0.13 mm

Strengths

  • Broadest non-metal material range of the group
  • Same-day production and Bay Area delivery
  • Published starting price and 30-day terms for business accounts

Limits

  • Laser-focused: 2D cutting plus bending; no CNC machining
  • Same-day guarantee limited to select materials and processes

ponoko.com · checked September 13, 2026

SendCutSend alternatives — FAQ

What are the best alternatives to SendCutSend?

FabDigit when the part needs hems, welds, hardware, any of 150+ finishes, heat treatment and inspection reports priced together, real CNC machining in any of 790 grades, or a lower price on the same drawing (price-beat offer on every quote). OSH Cut is the nearest like-for-like own-shop model (instant quote, plate to 1", tube laser, ISO 9001). Fabworks for parts larger than 30 × 44 in. Xometry and Protolabs for certifications (AS9100D, ITAR) and sheet metal inside a multi-process order. Fictiv for managed programs. Ponoko for non-metals and same-day. The situation table maps each reason to a start.

What can SendCutSend not do?

From its own pages: cuts are 2D perpendicular only (no V-grooves, contours or partial-depth cuts); bends to 130° with no hems, coining, curls or roll forming and no custom bend radii; CNC machining in 6061-T6 billet only, 7 × 7 × 12 in, ±0.005" fixed; welding only to close seams; no cosmetic-part protection; shipping to the US and Canada only; no ISO 9001, AS9100 or ITAR published.

Is OSH Cut better than SendCutSend?

Different, not better. OSH Cut cuts thicker (steel and aluminum to 1" vs SendCutSend’s 0.250" bending limit and laser to 0.750"), bends longer (119"), laser-cuts tube and is ISO 9001 certified, with a 2-day standard guaranteed as selected. SendCutSend stocks more materials (175+), publishes prices, ships free from $39 and offers a 24-hour tier. OSH Cut does no welding either and does not offer free shipping.

Who does hems and bends over 130°?

FabDigit (coining and hems quoted, engineer-checked bend order), Protolabs (hems on the 5-day tier), Xometry (manual quote), Fictiv. SendCutSend and OSH Cut do not hem; Fabworks bends to 135°.

Which SendCutSend alternatives are ISO 9001 or ITAR?

OSH Cut ISO 9001:2015; Protolabs ISO 9001 and ITAR on sheet metal; Xometry ISO 9001 / 13485, AS9100D, IATF 16949, ITAR; Fictiv ISO 9001 (no ITAR); Ponoko lists ISO 9001 and ITAR; FabDigit’s production partners hold ISO 9001:2015 (FABDIGIT INC. itself is not certified). Fabworks publishes none.

Which alternative is as fast?

OSH Cut same day / 2-day standard, Fabworks next day on small orders, Protolabs 1-day expedite and 3-day tier, Ponoko same day in the Bay Area, Xometry 3-day standard, FabDigit from 3 business days. SendCutSend’s 24-hour tier remains the fastest published for bent parts with finishing.

Does anyone match SendCutSend’s price on flat parts?

Not with published prices. OSH Cut says its pricing engine is most competitive on nested, mid-to-large jobs and bent parts. Fabworks and the networks quote instantly but do not publish example prices. FabDigit publishes engine-sampled price curves in its sheet metal cost guide.

Machined parts too? See the CNC machining comparison and Xometry alternatives.

Sources

Facts read from each company’s own public pages on September 13, 2026; FabDigit runs this site and is listed first. Prices are compared as published policy, not as one number — our sampled prices are in the CNC and sheet metal cost guides. SendCutSend is described from sendcutsend.com (pricing, processing times, shipping, laser cutting, bending and CNC machining pages). Send Cut Send Inc. is not affiliated with FabDigit. Vendor names identify the services compared and belong to their owners. Out-of-date fact? sales@fabdigit.com.

Quote the whole enclosure at FabDigit.

Cut, bend, hem, hardware, weld, any of 150+ finishes and heat treatment on one line, an engineer checking the flat pattern, inspection reports chosen in the form — and if the SendCutSend quote is lower, send it and FabDigit beats it.

Get an instant sheet metal quoteSheet metal capabilities