Basalt vs Travertine
Natural Material · grade comparison
Basalt and Travertine are both natural material grades. Basalt is the stronger of the two: tensile strength 15 MPa (2.18 ksi) against 6 MPa (0.798 ksi) for Travertine, about 173% more. In exchange, Travertine is the more ductile: elongation 0.1% versus 0.05% for Basalt. Travertine is lighter (2.45 g/cm³ vs 2.9 g/cm³ for Basalt) and Basalt is stiffer (70 GPa vs 42 GPa). On the shop floor, Travertine machines more easily (good vs not recommended).
BasaltChoose it when strength drives the design, or when the part sees heat.
TravertineChoose it when the part is bent, formed or impact-loaded, or when weight is the constraint.
Basalt vs Travertine: propertiesHow to read these bars
- One bar per material. A full bar is the highest value among all natural material grades in the FabDigit library; each bar is drawn as a share of that.
- The better value (by the usual engineering direction) is in bold. Rows with no direction — density, thermal conductivity — have no bold.
- Values are typical room-temperature figures for the condition named on each card.
- Confirm against the certified mill or resin datasheet before design release.
How to read these bars
- One bar per material. A full bar is the highest value among all natural material grades in the FabDigit library; each bar is drawn as a share of that.
- The better value (by the usual engineering direction) is in bold. Rows with no direction — density, thermal conductivity — have no bold.
- Values are typical room-temperature figures for the condition named on each card.
- Confirm against the certified mill or resin datasheet before design release.
Mechanical
Strength, stiffness, ductility and hardness at room temperature.
Elastic (Young's) Modulus
Shear Modulus
Bulk Modulus
Poisson's Ratio
Tensile Strength (Ultimate)
Elongation at Break
Compressive Strength
Flexural Strength
Shear Strength
Fracture Toughness (K_IC)
Hardness, Knoop
Hardness, Mohs
Physical
Density and transition temperatures.
Density
Melting Point (Solidus)
Porosity
Thermal
How each material carries heat and how hot it can run.
Thermal Conductivity
Specific Heat Capacity
Thermal Expansion (CTE, 20–100 °C)
Max Service Temperature (continuous)
Min Service Temperature
Electrical
Conductivity and insulation.
Electrical Resistivity
Chemical & Environmental
Corrosion and environmental resistance (0–100 scores).
Corrosion Resistance
Manufacturability
FabDigit workshop ratings (0–100 scores) — how each material behaves on the machine.
Machinability
Polishability
Sustainability
Primary-production footprint per kilogram.
Embodied Energy (primary production)
Embodied Carbon (primary production)
Embodied Water
Same in both: Typical Recycled Content 0%
Common Calculations
Ratios derived from the values above.
Specific Strength (UTS / density)
Specific Stiffness (E / density)
Thermal Diffusivity
Same in both: Thermal Shock Resistance Index 0
Strength versus weight
Yield strength against density for every natural material grade in the FabDigit library; the compared grades are highlighted. Up and left is stronger for its weight.
Manufacturing and finishing
| Capability | Basalt | Travertine |
|---|---|---|
| Default condition | — | — |
| Relative cost | $ Budget | $ Budget |
| Min. machined wall | — | — |
| Best machined surface | — | — |
Basalt vs Travertine — frequently asked
Is Basalt stronger than Travertine?
Yes. Basalt has a typical tensile strength of 15 MPa (2.18 ksi) against 6 MPa (0.798 ksi) for Travertine — about 173% more.
Which is cheaper, Basalt or Travertine?
Both sit in the same relative cost tier ($, budget); the part price will be decided by machining time, tolerance and quantity rather than by the material.
Which is easier to machine, Basalt or Travertine?
Travertine. Its machinability rates good (62/100) against not recommended (12/100) for Basalt.
Ready to make it?
Upload a CAD file and FabDigit prices the part in Basalt and Travertine side by side — material, machining time, tolerance and finish in one quote. Certified material data ships with the order on request.
Typical handbook values for the conditions named above, normalised for comparison. Hardness on non-Brinell scales is converted approximately for charting only. Request certified data with your order for design-critical properties.