Bamboo Plywood vs Plywood
Natural Material · grade comparison
Bamboo Plywood and Plywood are both natural material grades. Bamboo Plywood is the stronger of the two: tensile strength 95 MPa (13.8 ksi) against 30 MPa (4.35 ksi) for Plywood, about 3.2 times as much. Bamboo Plywood is the more ductile: elongation 1.2% versus 1% for Plywood. Plywood is lighter (0.55 g/cm³ vs 0.7 g/cm³ for Bamboo Plywood) and Bamboo Plywood is stiffer (10 GPa vs 9 GPa). On the shop floor, Plywood sits in a lower cost tier (budget, $) than Bamboo Plywood (standard, $$).
Bamboo PlywoodChoose it when strength drives the design, or when the part is bent, formed or impact-loaded.
PlywoodChoose it when weight is the constraint, or when cost is the deciding factor.
Bamboo Plywood vs Plywood: propertiesHow to read these bars
- One bar per material. A full bar is the highest value among all natural material grades in the FabDigit library; each bar is drawn as a share of that.
- The better value (by the usual engineering direction) is in bold. Rows with no direction — density, thermal conductivity — have no bold.
- Values are typical room-temperature figures for the condition named on each card.
- Confirm against the certified mill or resin datasheet before design release.
How to read these bars
- One bar per material. A full bar is the highest value among all natural material grades in the FabDigit library; each bar is drawn as a share of that.
- The better value (by the usual engineering direction) is in bold. Rows with no direction — density, thermal conductivity — have no bold.
- Values are typical room-temperature figures for the condition named on each card.
- Confirm against the certified mill or resin datasheet before design release.
Mechanical
Strength, stiffness, ductility and hardness at room temperature.
Elastic (Young's) Modulus
Shear Modulus
Poisson's Ratio
Tensile Strength (Ultimate)
Elongation at Break
Compressive Strength
Flexural Strength
Shear Strength
Fracture Toughness (K_IC)
Physical
Density and transition temperatures.
Density
Porosity
Thermal
How each material carries heat and how hot it can run.
Thermal Conductivity
Thermal Expansion (CTE, 20–100 °C)
Max Service Temperature (continuous)
Same in both: Specific Heat Capacity 1,600 J/kg·K0.38 BTU/lb·°F · Min Service Temperature -40°C-40 °F
Electrical
Conductivity and insulation.
Electrical Resistivity
Dielectric Strength
Chemical & Environmental
Corrosion and environmental resistance (0–100 scores).
Corrosion Resistance
Manufacturability
FabDigit workshop ratings (0–100 scores) — how each material behaves on the machine.
Machinability
Polishability
Sustainability
Primary-production footprint per kilogram.
Embodied Energy (primary production)
Embodied Carbon (primary production)
Embodied Water
Typical Recycled Content
Common Calculations
Ratios derived from the values above.
Specific Strength (UTS / density)
Specific Stiffness (E / density)
Thermal Diffusivity
Same in both: Thermal Shock Resistance Index 0
Strength versus weight
Yield strength against density for every natural material grade in the FabDigit library; the compared grades are highlighted. Up and left is stronger for its weight.
Manufacturing and finishing
| Capability | Bamboo Plywood | Plywood |
|---|---|---|
| Default condition | — | — |
| Relative cost | $$ Standard | $ Budget |
| Min. machined wall | — | — |
| Best machined surface | — | — |
Bamboo Plywood vs Plywood — frequently asked
Is Bamboo Plywood stronger than Plywood?
Yes. Bamboo Plywood has a typical tensile strength of 95 MPa (13.8 ksi) against 30 MPa (4.35 ksi) for Plywood — about 3.2 times as much.
Which is cheaper, Bamboo Plywood or Plywood?
Plywood is the lower-cost material: it sits in the budget tier ($) while Bamboo Plywood is standard ($$). Part price depends far more on geometry, tolerance and quantity than on raw stock — upload a CAD file for a live quote.
When should I choose Bamboo Plywood over Plywood?
Pick Bamboo Plywood when strength drives the design, or when the part is bent, formed or impact-loaded. Pick Plywood when weight is the constraint, or when cost is the deciding factor.
Ready to make it?
Upload a CAD file and FabDigit prices the part in Bamboo Plywood and Plywood side by side — material, machining time, tolerance and finish in one quote. Certified material data ships with the order on request.
Typical handbook values for the conditions named above, normalised for comparison. Hardness on non-Brinell scales is converted approximately for charting only. Request certified data with your order for design-critical properties.