N-F2 vs SF11
Glass · grade comparison
N-F2 and SF11 are both glass grades. N-F2 is the stronger of the two: tensile strength 45 MPa (6.53 ksi) against 40 MPa (5.8 ksi) for SF11, about 13% more. N-F2 is lighter (2.65 g/cm³ vs 4.74 g/cm³ for SF11) and SF11 is stiffer (66 GPa vs 57 GPa).
N-F2Choose it when strength drives the design, or when weight is the constraint.
N-F2 vs SF11: propertiesHow to read these bars
- One bar per material. A full bar is the highest value among all glass grades in the FabDigit library; each bar is drawn as a share of that.
- The better value (by the usual engineering direction) is in bold. Rows with no direction — density, thermal conductivity — have no bold.
- Values are typical room-temperature figures for the condition named on each card.
- Confirm against the certified mill or resin datasheet before design release.
How to read these bars
- One bar per material. A full bar is the highest value among all glass grades in the FabDigit library; each bar is drawn as a share of that.
- The better value (by the usual engineering direction) is in bold. Rows with no direction — density, thermal conductivity — have no bold.
- Values are typical room-temperature figures for the condition named on each card.
- Confirm against the certified mill or resin datasheet before design release.
Mechanical
Strength, stiffness, ductility and hardness at room temperature.
Elastic (Young's) Modulus
Shear Modulus
Bulk Modulus
Poisson's Ratio
Tensile Strength (Ultimate)
Flexural Strength
Fracture Toughness (K_IC)
Hardness, Knoop
Hardness, Mohs
Same in both: Elongation at Break 0% · Compressive Strength 800 MPa116 ksi · Hardness, Vickers 450 HV
Physical
Density and transition temperatures.
Density
Refractive Index
Light Transmission
Same in both: Porosity 0%
Thermal
How each material carries heat and how hot it can run.
Thermal Conductivity
Specific Heat Capacity
Thermal Expansion (CTE, 20–100 °C)
Same in both: Max Service Temperature (continuous) 400°C752 °F · Min Service Temperature -200°C-328 °F
Electrical
Conductivity and insulation.
Electrical Resistivity
Volume Resistivity
Dielectric Strength
Dielectric Constant (1 MHz)
Dissipation Factor (1 MHz)
Chemical & Environmental
Corrosion and environmental resistance (0–100 scores).
Corrosion Resistance
Manufacturability
FabDigit workshop ratings (0–100 scores) — how each material behaves on the machine.
Machinability
Polishability
Sustainability
Primary-production footprint per kilogram.
Embodied Carbon (primary production)
Same in both: Embodied Energy (primary production) 45 MJ/kg19,347 BTU/lb · Embodied Water 120 L/kg14.4 gal/lb · Typical Recycled Content 5%
Common Calculations
Ratios derived from the values above.
Specific Strength (UTS / density)
Specific Stiffness (E / density)
Same in both: Thermal Diffusivity 0.4 mm²/s · Thermal Shock Resistance Index 0
Strength versus weight
Yield strength against density for every glass grade in the FabDigit library; the compared grades are highlighted. Up and left is stronger for its weight.
Manufacturing and finishing
| Capability | N-F2 | SF11 |
|---|---|---|
| Default condition | — | — |
| Relative cost | $$$$ High | $$$$ High |
| Min. machined wall | — | — |
| Best machined surface | — | — |
N-F2 vs SF11 — frequently asked
Is N-F2 stronger than SF11?
Yes. N-F2 has a typical tensile strength of 45 MPa (6.53 ksi) against 40 MPa (5.8 ksi) for SF11 — about 13% more.
Which is cheaper, N-F2 or SF11?
Both sit in the same relative cost tier ($$$$, high); the part price will be decided by machining time, tolerance and quantity rather than by the material.
When should I choose N-F2 over SF11?
Pick N-F2 when strength drives the design, or when weight is the constraint.
Ready to make it?
Upload a CAD file and FabDigit prices the part in N-F2 and SF11 side by side — material, machining time, tolerance and finish in one quote. Certified material data ships with the order on request.
Typical handbook values for the conditions named above, normalised for comparison. Hardness on non-Brinell scales is converted approximately for charting only. Request certified data with your order for design-critical properties.