Steel H26 vs H13 vs H21 vs 5CrMnMo
Benchmark · 4 materials
Side-by-side benchmark of 4 steel grades.
H26 vs H13 and 2 more: propertiesHow to read these bars
- One bar per material. A full bar is the highest value among all steel grades in the FabDigit library; each bar is drawn as a share of that.
- The better value (by the usual engineering direction) is in bold. Rows with no direction — density, thermal conductivity — have no bold.
- Values are typical room-temperature figures for the condition named on each card.
- Confirm against the certified mill or resin datasheet before design release.
How to read these bars
- One bar per material. A full bar is the highest value among all steel grades in the FabDigit library; each bar is drawn as a share of that.
- The better value (by the usual engineering direction) is in bold. Rows with no direction — density, thermal conductivity — have no bold.
- Values are typical room-temperature figures for the condition named on each card.
- Confirm against the certified mill or resin datasheet before design release.
Mechanical
Strength, stiffness, ductility and hardness at room temperature.
Bulk Modulus
Poisson's Ratio
Tensile Strength (Ultimate)
Yield Strength (0.2% offset)
Elongation at Break
Reduction in Area
Compressive Strength
Shear Strength
Charpy V-Notch Impact (RT)
Hardness, Brinell
Hardness, Rockwell B
Hardness, Vickers
Fatigue Strength (Endurance Limit)
Fracture Toughness (K_IC)
Hardness, Rockwell C
Same in both: Elastic (Young's) Modulus 210 GPa30.5 Msi · Shear Modulus 81 GPa11.7 Msi
Physical
Density and transition temperatures.
Density
Melting Point (Solidus)
Liquidus Temperature
Thermal
How each material carries heat and how hot it can run.
Thermal Conductivity
Specific Heat Capacity
Thermal Expansion (CTE, 20–100 °C)
Max Service Temperature (continuous)
Min Service Temperature
Same in both: Latent Heat of Fusion 250 J/g107 BTU/lb
Electrical
Conductivity and insulation.
Electrical Conductivity
Electrical Resistivity
Chemical & Environmental
Corrosion and environmental resistance (0–100 scores).
Corrosion Resistance
Galvanic Potential (seawater, vs SCE)
Manufacturability
FabDigit workshop ratings (0–100 scores) — how each material behaves on the machine.
Machinability
Machinability Rating (AISI 1212 = 100 %)
Weldability
Formability (cold)
Castability
Brazeability / Solderability
Polishability
Sustainability
Primary-production footprint per kilogram.
Embodied Energy (primary production)
Embodied Carbon (primary production)
Embodied Water
Same in both: Typical Recycled Content 45%
Common Calculations
Ratios derived from the values above.
Specific Strength (UTS / density)
Specific Stiffness (E / density)
Modulus of Resilience
Thermal Diffusivity
Thermal Shock Resistance Index
Strength versus weight
Yield strength against density for every steel grade in the FabDigit library; the compared grades are highlighted. Up and left is stronger for its weight.
Manufacturing and finishing
| Capability | H26 | H13 | H21 | 5CrMnMo |
|---|---|---|---|---|
| CNC machining | Yes | Yes | ||
| 3D printing | Yes | |||
| Default condition | Annealed | Annealed | ||
| Relative cost | $$$$ High | $$$$ High | $$ Standard | $ Budget |
| Min. machined wall | 0.8 mm | 0.8 mm | ||
| Best machined surface | Ra 1.6 µm | Ra 1.6 µm | ||
| AlCrN | Yes | Yes | ||
| AlTiN | Yes | Yes | ||
| Black Oxide | Yes | Yes | ||
| CVD Al2O3 | Yes | Yes | ||
| CVD TiCN | Yes | Yes | ||
| CVD TiN | Yes | Yes | ||
| Cerakote | Yes | Yes | ||
| Chrome Plating | Yes | Yes | ||
| CrN | Yes | Yes | ||
| DLC | Yes | Yes | ||
| E-Coating | Yes | Yes | ||
| HVOF Coating | Yes | Yes | ||
| Hot-Dip Galvanizing | Yes | Yes | ||
| MoS2 | Yes | Yes | ||
| Multilayer CVD | Yes | Yes | ||
| Nickel Plating | Yes | Yes | ||
| PTFE Coating | Yes | Yes | ||
| Painting | Yes | Yes |
They share 9 finishes: Copper Plating, Electroless Nickel (EN), Epoxy Coating, Gold Plating, Hard Chrome Plating, Manganese Phosphate, Plasma Spray, Silver Plating, Zinc Phosphate.
Ready to make it?
Upload a CAD file and FabDigit prices the part in H26 and H13 side by side — material, machining time, tolerance and finish in one quote. Certified material data ships with the order on request.
Typical handbook values for the conditions named above, normalised for comparison. Hardness on non-Brinell scales is converted approximately for charting only. Request certified data with your order for design-critical properties.