Benchmark · 4 materials
Steel P265GH vs Steel 17Mn4 vs Steel Q345R vs Steel A516 Gr 60
All steel grades — bands show the family's 10th–90th percentile. The best value in each row is in bold; metric first, imperial in gray.
Properties
| Property | P265GH | 17Mn4 | Q345R | A516 Gr 60 |
|---|---|---|---|---|
| Yield strengthMPa | 265 MPa38 ksi | 285 MPa41 ksi | 345 MPa50 ksi | 220 MPa32 ksi |
| Tensile strengthMPa | 460 MPa67 ksi | 460 MPa67 ksi | 510 MPa74 ksi | 480 MPa70 ksi |
| Specific strengthMPa·cm³/g | 34 | 36 | 44 | 28 |
| Densityg/cm³ | 7.85 g/cm³0.284 lb/in³ | 7.85 g/cm³0.284 lb/in³ | 7.85 g/cm³0.284 lb/in³ | 7.85 g/cm³0.284 lb/in³ |
| Hardness (HB equiv.)HB | 160 HB | 160 HB | 170 HB | 155 HB |
| Max service temp°C | 480 °C896 °F | 480 °C896 °F | 480 °C896 °F | 480 °C896 °F |
| Min service temp°C | -50 °C-58 °F | -50 °C-58 °F | -50 °C-58 °F | -50 °C-58 °F |
| Electrical conductivity% IACS | 11 % IACS6.4 MS/m | 11 % IACS6.4 MS/m | 11 % IACS6.4 MS/m | 11 % IACS6.4 MS/m |
| Machinability/100 | Very good75 / 100 | Very good75 / 100 | Very good75 / 100 | Very good75 / 100 |
| Weldability/100 | Excellent92 / 100 | Excellent92 / 100 | Excellent92 / 100 | Excellent92 / 100 |
| Formability/100 | Very good75 / 100 | Very good75 / 100 | Very good75 / 100 | Very good75 / 100 |
| Relative cost | $$ Standard | $$ Standard | $$ Standard | $$ Standard |
| Processes | CNC, Sheet | CNC, Sheet | CNC, Sheet | CNC, Sheet |
Where each grade sits
One track per property; coloured markers are the compared grades, the shaded band is the steel family 10th–90th percentile and the tick its median.
Yield strength265 MPa
250 MPafamily median 540 MPa1,270 MPa
Tensile strength460 MPa
420 MPafamily median 800 MPa1,750 MPa
Density7.85 g/cm³
7.8 g/cm³family median 7.85 g/cm³7.85 g/cm³
Hardness (HB equiv.)160 HB
134 HBfamily median 210 HB558 HB
Max service temp480 °C
200 °Cfamily median 400 °C540 °C
Electrical conductivity11 % IACS
5.7 % IACSfamily median 9.7 % IACS12 % IACS
Machinability75 / 100
29 / 100family median 75 / 10075 / 100
Relative cost25
14family median 2553
P265GH17Mn4Q345RA516 Gr 60
Strength versus weight
Manufacturing and finishing
| Capability | P265GH | 17Mn4 | Q345R | A516 Gr 60 |
|---|---|---|---|---|
| CNC machining | Yes | Yes | Yes | Yes |
| Sheet metal | Yes | Yes | Yes | Yes |
| Default condition | HR | HR | HR | HR |
| Min. machined wall | 0.8 mm | 0.8 mm | 0.8 mm | 0.8 mm |
| Best machined surface | Ra 1.6 µm | Ra 1.6 µm | Ra 1.6 µm | Ra 1.6 µm |
| Heat treatments | Quench & Temper, Full Anneal, Stress Relief | Quench & Temper, Full Anneal, Stress Relief | Quench & Temper, Full Anneal, Stress Relief | Quench & Temper, Full Anneal, Stress Relief |
| AlCrN | Yes | Yes | Yes | Yes |
| AlTiN | Yes | Yes | Yes | Yes |
| Black Oxide | Yes | Yes | Yes | Yes |
| CVD Al2O3 | Yes | Yes | Yes | Yes |
| CVD TiCN | Yes | Yes | Yes | Yes |
| CVD TiN | Yes | Yes | Yes | Yes |
| Cerakote | Yes | Yes | Yes | Yes |
| Chemical Etching | Yes | Yes | Yes | Yes |
| Chrome Plating | Yes | Yes | Yes | Yes |
| Copper Plating | Yes | Yes | Yes | Yes |
| CrN | Yes | Yes | Yes | Yes |
| DLC | Yes | Yes | Yes | Yes |
| Dot Peen Marking | Yes | Yes | Yes | Yes |
| E-Coating | Yes | Yes | Yes | Yes |
| Electro-chemical Etching | Yes | Yes | Yes | Yes |
| Electroless Nickel (EN) | Yes | Yes | Yes | Yes |
| Embossing / Debossing | Yes | Yes | Yes | Yes |
| Epoxy Coating | Yes | Yes | Yes | Yes |
Showing 18 of 47 finishes — the full list is on each grade's datasheet.
Typical handbook values for the default condition, normalised for comparison. Hardness on non-Brinell scales is converted approximately for charting only. Request certified data with your order for design-critical properties.