Benchmark · 4 materials
PA66 vs PA6 vs PC-ABS vs PA11
All polymer grades — bands show the family's 10th–90th percentile. The best value in each row is in bold; metric first, imperial in gray.
Properties
| Property | PA66 | PA6 | PC-ABS | PA11 |
|---|---|---|---|---|
| Yield strengthMPa | 85 MPa12 ksi | 60 MPa9 ksi | 50 MPa7 ksi | 40 MPa6 ksi |
| Tensile strengthMPa | 95 MPa14 ksi | 80 MPa12 ksi | 60 MPa9 ksi | 50 MPa7 ksi |
| Specific strengthMPa·cm³/g | 75 | 53 | 43 | 38 |
| Densityg/cm³ | 1.14 g/cm³0.041 lb/in³ | 1.14 g/cm³0.041 lb/in³ | 1.15 g/cm³0.042 lb/in³ | 1.04 g/cm³0.038 lb/in³ |
| Max service temp°C | 100 °C212 °F | 100 °C212 °F | 90 °C194 °F | 100 °C212 °F |
| Min service temp°C | -30 °C-22 °F | -30 °C-22 °F | -30 °C-22 °F | -30 °C-22 °F |
| Electrical conductivity% IACS | < 0.001 % IACSinsulator | < 0.001 % IACSinsulator | < 0.001 % IACSinsulator | < 0.001 % IACSinsulator |
| Machinability/100 | Very good80 / 100 | Very good75 / 100 | Excellent85 / 100 | Very good80 / 100 |
| Weldability/100 | Good65 / 100 | Good60 / 100 | Excellent95 / 100 | Good60 / 100 |
| Formability/100 | Fair40 / 100 | Fair40 / 100 | Excellent85 / 100 | Fair45 / 100 |
| Relative cost | $$ Standard | $ Budget | $$ Standard | $$$ Premium |
| Processes | CNC, Sheet, Molding | CNC, Sheet, Molding | CNC, Sheet, Molding | 3DP |
Where each grade sits
One track per property; coloured markers are the compared grades, the shaded band is the polymer family 10th–90th percentile and the tick its median.
Yield strength85 MPa
5 MPafamily median 50 MPa89 MPa
Tensile strength95 MPa
11 MPafamily median 55 MPa95 MPa
Density1.14 g/cm³
0.97 g/cm³family median 1.2 g/cm³1.59 g/cm³
Hardness (HB equiv.)—
65 HBfamily median 170 HB481 HB
Max service temp100 °C
72 °Cfamily median 100 °C257 °C
Electrical conductivity< 0.001 % IACS
< 0.001 % IACSfamily median < 0.001 % IACS< 0.001 % IACS
Machinability80 / 100
20 / 100family median 70 / 10085 / 100
Relative cost20
14family median 2899
PA66PA6PC-ABSPA11
Strength versus weight
Manufacturing and finishing
| Capability | PA66 | PA6 | PC-ABS | PA11 |
|---|---|---|---|---|
| CNC machining | Yes | Yes | Yes | — |
| Sheet metal | Yes | Yes | Yes | — |
| Injection molding | Yes | Yes | Yes | — |
| 3D printing | — | — | — | Yes |
| Default condition | Unfilled | Unfilled | Unfilled | Unfilled |
| Min. machined wall | 0.5 mm | 0.5 mm | 0.5 mm | — |
| Best machined surface | Ra 0.8 µm | Ra 0.8 µm | Ra 0.8 µm | — |
| Heat treatments | — | — | — | — |
| Chemical Etching | Yes | Yes | Yes | — |
| Chrome Plating (Plastic) | Yes | Yes | Yes | — |
| Clear Coating | — | — | — | Yes |
| Conductive Coating | — | — | — | Yes |
| Dot Peen Marking | Yes | Yes | Yes | — |
| Dyeing (Nylon) | — | — | — | Yes |
| EMI Shielding Coating | Yes | Yes | Yes | Yes |
| Electro-chemical Etching | Yes | Yes | Yes | — |
| Embossing / Debossing | Yes | Yes | Yes | — |
| Hot Stamping | Yes | Yes | Yes | — |
| In-Mold Labeling (IML) | Yes | Yes | Yes | — |
| Ink Stamping | Yes | Yes | Yes | — |
| Laser Marking | Yes | Yes | Yes | — |
| Mechanical Engraving | Yes | Yes | Yes | — |
| Pad Printing | Yes | Yes | Yes | — |
| Painting | Yes | Yes | Yes | Yes |
| Primer Coating | — | — | — | Yes |
| Soft Touch Coating | Yes | Yes | Yes | Yes |
Showing 18 of 24 finishes — the full list is on each grade's datasheet.
Typical handbook values for the default condition, normalised for comparison. Hardness on non-Brinell scales is converted approximately for charting only. Request certified data with your order for design-critical properties.